Fujitsu DL7600, Руководство пользователя

Страница: 123 / 285

USING SETUP MODE
User's Manual
5-29
Resetting MENU1 and MENU2
To reset the factory defaults for both MENU1 and MENU2, select the
DEFAULT/INITIAL function. For more information, see the section
Resetting Defaults later in this chapter. The DEFAULT function cannot
reset those options which are handled by the HARDWRE, ADJUST,
CONFIG, and GAP-ADJ functions. The INITIAL function can reset
those options which are handled by the HARDWRE, ADJUST, CONFIG,
and GAP-ADJ functions.
The HARDWRE function defines the printer’s hardware operating
conditions. If you are using the optional RS-232C serial interface, the
serial interface options must be set properly for the printer to function
correctly with your system hardware.
Table 5.5 describes the HARDWRE items and options. Items are listed in
the order in which they are printed. The procedure for changing the
hardware options is described after Table 5.5.
Table 5.5 HARDWRE Items and Options
NOTE: Underlined options are the factory defaults.
HARDWRE
Items
Options Description
<PPR-OUT> Specifies how the printer responds when you
run out of paper.
CNTONLY The printer detects paper-out only for
continuous forms. Printing stops and the
PAPER OUT indicator lights red.
DETECT The printer detects paper-out for both
continuous forms and single sheets. Printing
stops and the PAPER OUT indicator lights
red.
IGNORE The printer ignores paper-out for both
continuous forms and single sheets. Printing
continues until no more data remains. No
PAPER OUT warning is displayed.
CHANGING
HARDWARE
OPTIONS