Fujitsu DL7400, Руководство пользователя

Страница: 166 / 275

TROUBLE-SHOOTING
7-2
User's Manual
Table 7.1 Print Quality Problems and Solutions
Problem Solution
Make sure that the ribbon cartridge is
properly installed and that the ribbon feeds
smoothly.
Check ribbon wear. Replace the ribbon if
necessary.
Check the difference of thickness of
medium. If auto adjustment function detects
difference level of medium, it doesn’t work
properly. In this case you must adjust for
paper thickness manually. See ADJUSTING
PAPER THICKNESS in Chapter 3.
Printing is too light or
too dark.
If you adjust for paper thickness manually,
tune-up as follows.
If printing is too light, decrease setting.
If printing is dark, increase setting.
Note
Printer accepts the value for paper thickness
from Printer Driver or application program.
In this case, check the setting of the Printer
Driver or application program at your host
computer. And then tune the value by way
above.
Stains or smudges
appear on the page. Check ribbon wear. Replace the ribbon if
necessary.
Check whether the tip of the print head is
dirty.
Clean the head with a soft cloth if necessary.
The page is blank.
Make sure that the ribbon cartridge is
properly installed.
Printing is erratic or the
wrong characters are
printed. One or more
“?” characters are
printed. Make sure that the interface cable is securely
connected to both the printer and computer.
Make sure that the printer emulation selected
in your software is the same as the emulation
selected on the printer. See the section
Selecting an Emulation
in Chapter 2.
If you are using an RS-232C serial interface,
make sure that the serial settings required by
your software or computer are the same as
the settings on the printer. See the section
Hardware Items and Options
in Chapter 5.