Fujitsu DL7400, Руководство пользователя

Страница: 141 / 275

USING SETUP MODE
User's Manual
5-51
This section describes how to reset the printer’s power-on defaults, all of
the factory defaults, or the factory defaults only for MENU1 and
MENU2.
Resetting Power-On Defaults
Power-on defaults are the settings saved in the printer’s permanent
memory. The defaults are enabled whenever you turn the printer on.
The easiest way to reset the power-on defaults is to turn the printer off
and then on again. This method is useful if you have made changes in
setup mode that you do not want to save.
Resetting Factory Defaults
Factory defaults are those settings preselected at the factory. For a list of
the printer’s factory defaults, see the section Printing a List of Selected
Options earlier in this chapter. To reset the factory defaults for all
functions, proceed as follows:
1. Turn off the printer.
2. While pressing the LOAD and, TEAR OFF buttons, turn on the
printer. Continue to press the two buttons until the printer beeps.
The factory defaults are now reset.
Another available method is to select INITIAL in SETUP mode.
The method of making settings is the same as the method for
selecting DEFAULT on the next page, except that INITIAL
must be selected instead of DEFAULT.
Resetting Factory Defaults in MENU1 and
MENU2
This method resets factory defaults for MENU1 and MENU2 options,
listed in Table 5.3, but does not reset the printer hardware, print position
adjustment, and configuration options. To reset the factory defaults in
MENU1 and MENU2, proceed as follows:
RESETTING
DEFAULTS