When an error is displayed in the
setup program
When the setup program started ,
Alert Window or
Error Window was displayed.
Cause:
Click the
OK
button without selecting any printer
driver.
Measure:
Select the printer driver to install and click the
OK
button.
Cause:
The folder path exceeds the specified number of
characters.
Measure:
Move the folder path of the Fujitsu DL Series
Software Setup program to the place where
the number of characters is 100 or less.
Cause:
The setup information file required for the
installation cannot be found.
(1) The setup information file may not be
present.
(2) The setup information file may be destroyed.
Measure:
(1) Run the Fujitsu DL Series Software Setup
program again.
(2) Obtain the latest printer driver from Support
& Downloads of the Fujitsu Isotec web site.
http://jp.fujitsu.com/group/fit/en/
** The above address was the URL at the
time when this manual was written.
Copyright © 2010 FUJITSU ISOTEC LIMITED
All rights reserved.
20 / 24
