Fujitsu DESKPOWER C600 Series, Руководство пользователя

Страница: 62 / 82

50
1 Before Installing a Peripheral
Device
This PC can accommodate various peripheral devices to expand its functions.
CAUTION
●
Use only peripheral devices recommended by Fujitsu.
Otherwise, an electric shock, a fire or a fault may occur.
CAUTION
●
When installing or removing a peripheral device, do not remove screws
other than those specified in the manual.
Otherwise, a personal injury or a fault may occur.
●
Read this manual carefully to ensure correct cable connections.
An incorrect connection can damage the PC or peripheral devices.
Notes on Handling
When installing a peripheral device, note the following.
●
Some peripheral devices may not be used on your PC.
Before purchasing a peripheral device, refer to the “System configuration diagram” to
determine whether the peripheral device can be used on your PC.
●
Whenever possible, use Fujitsu peripheral devices.
Malfunction or damage caused by the use of a third-party product instead of the Fujitsu device
shall not be covered by the warranty.
Before using a peripheral device in a category for which Fujitsu does not supply genuine
products, contact the third-party manufacturer to ask whether the device is compatible with
the PC.
●
Install one peripheral device at a time.
Installing more than one peripheral device at a time may cause driver installation to fail. After
you have installed a peripheral device, install another one.
●
Turn off the PC and connected devices.
For safety, be sure to unplug the PC and connected devices. Even if the PC is turned off, an
electric current flows in the PC unit.
●
Do not start work immediately after turning off the power.
Components inside the PC may be still hot. After turning off the power and unplugging the
PC, wait for about 10 minutes before starting work.
CHAPTER 6 Tokyo (49-62) 3/25/05, 8:29 AM 50