Fujitsu DESKPOWER 6000 Seriesl DESKPOWER 6000 SD Series, Руководство пользователя

Страница: 70 / 81

55
●
Do not start working right after you have turned off the computer.
Right after the computer power is removed, the device inside the computer is still hot. Turn
the computer off, remove the plug from the power outlet, and wait for approximately ten minutes
before starting to work.
●
Handle cables and devices with care inside the computer.
Do not damage or modify them.
●
Watch static electricity.
Boards and electric parts of internal peripheral devices are exposed. These devices could
be damaged by static electricity discharged from your body. Before handling these devices,
touch a large metallic object with your hand to discharge static electricity.
●
Do not touch the board surface, soldered parts, or connectors, with your hand.
Hold the metallic parts or the edge of the board.
●
Turning power for peripheral devices.
In general, peripheral devices should be turned on before the computer is turned on, but some
peripheral devices should be turned of afterward. See the manual attached to the peripheral
device.
●
Use the ACPI enabled peripheral device (Windows XP/2000/Me/98).
This computer uses ACPI (one of the power management standards for energy saving) for
its control function, and peripheral devices should support ACPI.
If you use a peripheral device that does not support ACPI, the peripheral device or the computer
may not function correctly. To check if the peripheral device supports ACPI or not, consult
the manufacturer of the peripheral device.
●
Get ready with a screwdriver.
You need to have a Phillips screwdriver to install or remove a peripheral device.
Use a suitable screwdriver that fits the size of the screw, and do not damage the screw head.
CHAPTER 4 (53-60) 11/15/01, 2:18 PM 55