Fujitsu DESKPOWER 6000 Seriesl DESKPOWER 6000 SD Series, Руководство пользователя

Страница: 47 / 81

32
■
Cautions
●
Before turning off the computer, finish the work and save your data.
●
Before turning off the computer, make sure that the disk access lamp or floppy disk access
lamp are all off. If you turn off the computer while these lamps are on, your data may not be
saved, or the data stored in the floppy disk or hard disk may be damaged.
●
If you have disconnected the power cord or the power has been interrupted while the
computer is on, put the power cord back to the power outlet, or wait until power is restored.
You do not have to press the power switch. The computer turns on and starts
automatically, when power is restored. The computer cannot be turned on, when [Energy
saving setting] – [Actions when AC power is restored] is set [Power OFF] in the BIOS Setup.
●
You cannot turn the power off during POST. Follow the procedure described later, after the
operating system has started up completely.
●
If the system stops with [Energy saving setting] – [Power switch] set [Standby] in the BIOS
Setup, hold down the power switch for four seconds to turn off the computer.
●
It may take some five seconds before the power LED lights, when restoring from the
standby mode. If you press the power button again, the system shutdown.
■
How to turn off the power
●
For Windows 98/Me/2000 model:
1 Click the [Start] button, then click [Shut down].
The [Shut down Windows] dialog box appears.
2 Click [Shut Down] from the pull down item.
The power is automatically turned off.
●
For Windows NT model:
1 Click the [Start] button, then click [Shut down].
The [Shut down Windows] dialog box appears.
2 Click [Shut Down the Computer], then click [Yes].
Press the power button to turn it off.
●
For Windows XP:
1 Click the [Start] button, then click [Turn Off Computer].
The [Turn Off Computer ] dialog box appears.
2 Select [Turn Off].
The power is automatically turned off.
Point
• The power can also be turned off in the following procedure.
1. Press the [Ctrl] + [Alt] + [Delete] keys.
The [Windows security] dialog box appears.
2. Click [Shutdown].
The [Shutdown Computer ] dialog box appears.
3. The power is automatically turned off.
5 Turn off the computer
CHAPTER 2 (23-33) 11/15/01, 2:15 PM 32