Fujitsu CELSIUS M770, Руководство по эксплуатации

Страница: 17 / 105

Important notes
Cleaning the device
Device, Transportation Retransportation Systemunit,see Device
Turn off all power and equipment switches and disconnect the power
plug from the mains outlet.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or acetone).
Never clean the device with water! Water entering into the device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system.
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been
moistened in mild domestic detergent and then carefully wrung out.
Use disinfectant wipes to clean the keyboard and the mouse.
Energy saving, disposal and recycling
Disposal Energysaving Recycling
You can fi nd information on these subjects in the "Environment and Energy Information" manual
or on our website ( "http://www.fujitsu.com/fts/about/fts/environment-care/" ).
Note on the European Ecodesign Directive
The hibernate state (Advanced Con fi guration and Power Interface ACPI S4 Save-to-disk) is
not available for workstations in certain con fi gurations. As a consequence, it is not possible
for these systems to switch off automatically according to the Ecodesign directive.
With a working memory expansion which exceeds the free capacity of the system drive, the
capability to enable the hibernate state (ACPI S4) is technically not possible.
With suitably large system drives, the off state is automatically enabled in the
settings with which these workstations are delivered.
Fujitsu 13