Fujitsu BS2000 SE Series Скачать руководство пользователя страница 11

Страница: 11 / 93

1.2 Documentation for the SE servers

A wide range of documentation is available for the SE servers. As the BS2000 OSD/XC software package

comprises the BS2000 OSD/BC operating system and additional system-related software products, the

documentation for BS2000 OSD/XC consists of the following:

The manuals on BS2000 OSD/BC, which provide the basic literature on BS2000 OSD/XC.

The manuals for the system-related software products which belong to the BS2000 OSD/XC software package

also apply.

Any additions to the manuals are described in the Readme files for the various product versions. These Readme

files are available at

under the various products.

http://bs2manuals.ts.fujitsu.com

Current information, version and hardware dependencies and instructions for installing and using a product version

are contained in the associated Release Notice. Release Notices, in particular those relating to BS2000 OSD/XC,

M2000, X2000, and HNC, are also available at

http://bs2manuals.ts.fujitsu.com

The documentation for the SE servers consists of the following parts:

Operating Manual (consisting of a number of modules):

Basic Operating Manual

Operating Manual Server Unit /390

Operating Manual Server Unit x86

Operating Manual Additive Components

Operation and Administration

Security Manual

Quick Guide

Further literature is listed in Related publications.

Detailed information on the various hardware components and interfaces of the SE servers is provided in the data

sheet "FUJITSU Server BS2000 SE Series".

See the product site for the relevant server at

https://www.fujitsu.com/emeia/products/computing/servers/mainframe

/bs2000/

Go to

and select the desired SE server model.

FUJITSU Server BS2000

Содержание BS2000 SE Series






























































































Результаты поиска

Содержание BS2000 SE Series

Отзывы:

Похожие инструкции для BS2000 SE Series

Бренды по названию

Популярные бренды

Fujitsu BS2000 SE Series, Основное руководство по эксплуатации

Результаты поиска

Содержание BS2000 SE Series

Отзывы:

Похожие инструкции для BS2000 SE Series

Бренды по названию

Популярные бренды