BACnet
®
Gateway for VRF System
INSTRUCTION MANUAL r1.3.2 eng
91/103
Copyright© 2010-2017 Fujitsu General Limited - All rights reserved
Configuration
In this section is where main configuration for the signals is carried out.
8.4.1 General
Set the general gateway parameters.
Figure 8.4
General configuration
1. Gateway Name:
Descriptive name for the gateway in its use on the Configuration Tool.
2. Project Description:
Short description of the project.
3. Enable DHCP:
Enables and disables DHCP usage by the gateway.
4. IP:
Enter the IP address for the gateway (
192.168.100.144
by default).
5. NetMask:
Enter the gateway net mask address (
255.255.255.0
by default).
6. Gateway:
Enter the router or default gateway address if needed. In case you don’t want to use it, leave it
blank.
7. Password:
Enter the access password to allow IP connection to the box (
admin
by default).
1
2
3
4
5
6
7