Fujitsu BACnet UTY-ABGX, Инструкция по эксплуатации

Страница: 68 / 71

68
Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
Appendix
No.
Question
Answer
9.
I want to replace the PC with a new PC. Can the data be transferred?
The BACnet
®
Gateway has data “Export” and “Import” functions.
For details, see the “Import/Export” page.
10.
Unit expansion, replacement, and removal were performed. How can I reflect these changes at the
BACnet
®
Gateway?
Perform scanning again. → 6-6 “Unit Registration”.
11.
VRF System expansion, replacement, and removal were performed.
After setting the U10 USB Network Interface adaptor correctly, recognize the units by scanning.
→ 6-4 “Initial Setting” , 6-5 “Adaptor Setting”, 6-6 “Unit Registration”
12.
The state displayed on the screen does not change even though operation setting is performed.
When operation setting was performed at multiple units or at a group containing multiple units, it may take
some time for the state of that unit to change to the set contents.
13.
Can a transmission adaptor (UTR-YTMA) be used with the BACnet ®
Gateway?
Transmission adaptor (UTR-YTMA) cannot be used with the BACnet
®
Gateway.
14.
Can a WIBU-KEY used by a UTR-YLBA be used by the BACnet
®
Gateway?
Since the UTR-YLBA and BACnet
®
Gateway are separate products, the WIBU-KEY used by the UTR-
YLBA cannot be used by the BACnet
®
Gateway.
15.
Can a XLON
®
used by a UTR-YLBA be used by the BACnet
®
Gateway?
No. it cannot be used.
16.
Installation of “MSXML6” and “SQL Server Database Services” failed in the “Microsoft
®
SQL Server 2005
Express Setup” process, during the installation of BACnet
®
Gateway. What should I do?
To work around this issue, use the “Windows
®
Installer Clean Up utility” to remove references to MSXML 6.0
Service Pack 2. To do this, follow these steps:
1. Download the “Windows
®
Installer Clean Up utility”. To do this, visit the following Microsoft
®
Web site:
http://support.microsoft.com/kb/290(01
2. After installation, run the “Windows
®
Installer Clean Up utility”.
(. Select MSXML6 Service Pack 2 (KB954459) [6.20.1099.0] in the list, and then click Remove.
4. After restarting the Windows
®
, install the BACnet
®
Gateway again.
Reference: http://support.microsoft.com/kb/968749
17.
Warning message appeared saying that “SQL Server cannot install files to the compressed or encrypted
folder … “, while performing “Microsoft
®
SQL Server 2005 Express Setup” process, during the installation
of BACnet
®
Gateway. What should I do?
When the folder in the “Program Files” folder where the “Microsoft ® SQL Server 2005 Express” is to be
installed is compressed or encrypted, “Microsoft
®
SQL Server 2005 Express” cannot be installed.
Undo the compression or encryption of the “Program Files” folder where the “Microsoft
®
SQL Server 2005
Express” is to be installed, as follows.
1. Start “Windows ® Explorer”.
2. Right-click on the “Program Files” folder, select “properties”.
(. Click “Advanced...” button. Remove the check for “Compress contents to save disk space” and “Encrypt
contents secure data” of “Compress or Encrypt attributes” and press “OK”.
4. Click “OK” in the “property” of 2 and undo operation is executed for the item where the check has been
removed in (. Do not perform any operation on the Windows
®
while this operation is in progress. The
duration of the operation depends on the volume of the folder. The time given on screen gives a rough
estimation.
18.
Windows
®
File Protection error for “msxm16r.dll” in setup of SQL on localized Windows
®
XP SP3
Please refer to web site of the URL (http://support.microsoft.com/kb/958897)