Fujitsu BACnet UTY-ABGX, Инструкция по эксплуатации

Страница: 36 / 71

(6
Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
Settings
Items Contents
“IP Address” Enter the IP address used in BACnet ® communications. (IPv4 only)
“Subnet Mask”
Enter the subnet mask corresponding to the IP address used in
BACnet
®
communications.
“Device Instance No.” Enter the Instance No. of the local Device.
“Device Object Name”
Enter the object name of the local Device. (Up to 50 ASCII charac-
ters)
“Max_APDU_Length_Accepted” Select the acceptable APDU length.
“APDU_Timeout (m sec)” Enter the APDU timeout time in milliseconds.
“Number_of_APDU_Retries” Select the number of retries when time out occurs.
“APDU_Segment_Timeout (m sec)”
Enter the internal time at which APDU segment is resent, in milli-
seconds.
“I-Am Service Broadcast Sending
(at 60-second intervals)”
Check when you want to send I-Am Service periodically. (60-second
intervals)
“Unconfirmed COV Notification Service
Broadcast Sending”
COV notification is sent by broadcast even when SubscribeCOV
service is not subscribed. Refer to the interface specifications for
the target object.
* Depending on the number of units and their status,large number
of packets are sent.
“Process ID” Process ID used when sending COV notification.
“Synch. VRF System Time to Time Synchro-
nization/UTCT Time Synchronization.”
Check if you want to send “system time setting” to VRF units when
TimeSynchronization/UTCTimeSynchronization Service is received.
“Register as Foreign Device with BBMD” Check when you register as an external device to BBMD.
“BBMD at IP Address” BBMD IP address.
“BBMD at UDP Socket” BBMD UDP port No.