background image

En-2

FEATURES AND FUNCTIONS

FEATURES AND FUNCTIONS

 Energy saving and Comfortable function

INVERTER

At the start of operation, large amount of power is used to 
bring the room quickly to the desired temperature. Afterwards, 
the unit automatically switches to a low power setting for eco-
nomic and comfortable operation.

ECONOMY OPERATION

When ECONOMY operation mode is operated, the room tem-
perature will be little higher than the set-temp under cooling 
mode and lower than set-temp under heating mode. Therefore, 
the ECONOMY mode is able to save more energy than other 
normal mode.

HORIZONTAL AIRFLOW: COOLING/
DOWNWARD AIRFLOW: HEATING

For cooling, use horizontal airflow so the cool air does not 
blow directly on the occupants in the room. For heating, use 
downward air

fl

 ow to send powerful, warm air to the 

fl

 oor  and 

create a comfortable environment.

OMNI-DIRECTIONAL AIR FLOW 
(SWING OPERATION)

3-dimensional control over air direction swing is possible through 
dual use of both an UP/DOWN air direction swing and RIGHT/
LEFT air direction swing. Since UP/DOWN air direction 

fl

 aps op-

erate automatically according to the operating mode of the unit, 
it is possible to set air direction based on the operating mode.

SUPER QUIET OPERATION

When the FAN button is used to select QUIET, the indoor unit 
begins super quiet operation; the indoor unit’s airflow is re-
duced to produce quieter operation.

AUTO CHANGEOVER

The operation mode (cooling, dry, heating) is switched auto-
matically to maintain the set temperature, and the temperature 
is kept constant at all times.

10°C HEAT OPERATION

The room temperature can be maintained at 10°C so as to 

prevent the room temperature from falling too far.

 Convenient function

PROGRAM TIMER

The program timer allows you to integrate OFF timer and ON timer 

operations in a single sequence. The sequence can involve 1 tran-

sition from OFF timer to ON timer, or from ON timer to OFF timer, 

within a 24 hour period.

SLEEP TIMER

When the SLEEP timer button is pressed during heating mode, 

the air conditioner’s thermostat setting is gradually lowered dur-

ing the period of operation; during cooling or dry mode, the ther-

mostat setting is gradually raised during the period of operation. 

When the set time is reached, the unit automatically turns off.

 Clean function

REMOVABLE INTAKE GRILLE

The indoor unit’s intake grille can be removed for easy clean-

ing and maintenance.

MILDEW-RESISTANT FILTER

The AIR FILTER has been treated to resist mildew growth,thus 

allowing cleaner use and easier care.

POLYPHENOL CATECHIN AIR CLEANING FILTER

The polyphenol catechin air cleaning 

fi

 lter uses static electric-

ity to clean 

fi

 ne particles and dust in the air such as tobacco 

smoke and plant pollen that are too small to see. The filter 

contains catechin, which is highly effective against various 

bacteria by suppressing the growth of the bacteria adsorbed to 

the 

fi

 lter. Note that when the air cleaning 

fi

 lter is installed, the 

amount of air produced decreases, causing a slight decrease 

in the indoor unit’s performance.

NEGATIVE AIR IONS DEODORIZING FILTER

It comprises pottery super micro particles which can produce 
negative air ions having the effect of deodorizing and can ab-
sorb and remit the peculiar smell at home.

 Remote controller

WIRELESS REMOTE CONTROLLER

The wireless remote controller allows convenient control of air 

conditioner operation.

WIRED REMOTE CONTROLLER (OPTION)

The optional wired remote controller can be used. When you 

use remote controller, there are following different points as 

compared with using wireless remote controller.
[The additional functions for wired ones]

• Weekly timer

• Temperature set back timer
And you can use both wired and wireless remote controller si-

multaneously. (But function is limited)

When the restricted functions on the remote controller are 

used, beeping sound will be heard, OPERATION, TIMER and 

the 3rd lamp of the indoor unit will 

fl

 ash.

[The restricted functions for wireless ones]

• 10°C HEAT OPERATION

• TIMER (ON timer, OFF timer and Program timer)

• SLEEP TIMER

9315345516_OM.indb   2

9315345516_OM.indb   2

9/27/2012   1:52:18 PM

9/27/2012   1:52:18 PM

Содержание ASY71UI-LF




















Отзывы: