En-14
■
State of indicator lamps
: The instruction is relating to the wireless LAN control
(optional).
Lighting pattern:
Off, On,
Blinking,
Any state
State
Causes and solutions
See
page
Automatic defrosting operation
⇒
Please wait until
fi
nishing the defrosting
(maximum of 15 minutes).
10
Filter indicator
⇒
Clean the air
fi
lter and reset the
fi
lter
sign.
10
Error code display
⇒
Consult authorized service personnel.
-
Timer setting error because of Auto restart
⇒
Reset the clock and timer settings.
10
Test run operation (for authorized
personnel only)
⇒
Press
to quit the test run.
3
The power to the wireless router is
not on.
-
⇒
Check that the power to the wireless
router is on.
There is a possibility that the W
-
LAN
adapter is not properly connected to
the wireless router.
11
⇒
Disconnect the power supply to the air
conditioner (via breaker or plug), and
then re-connect.
The software of the W-LAN adapter
is being updated.
-
During the air conditioner registration
(pairing of W-LAN adapter)
11
Restricted function
11
■
Manual Auto operation and Filter indicator
reset
You can operate the air conditioner with
on the
indoor unit.
Status
Time to keep pressing
Mode or operation
In operation More than 3 seconds
Stop
Stopping
2 seconds or less
Filter indicator reset
More than 3 seconds and
less than 10 seconds
Auto
More than 10 seconds
(Only for servicing.
*
)
Forced cooling
* To stop the forced cooling, press this button or
on the remote
controller.
(3 times)
(Fast)
(Slow)
9387081244_OM.indb 14
9387081244_OM.indb 14
8/26/2019 6:31:58 PM
8/26/2019 6:31:58 PM
