background image

En-2

OPERATING MANUAL

1 Intake 

grille

Before starting operation, make sure that the intake grille has been 
shut completely. Incomplete closing might have an effect on the 
proper working or performance of the product.

Manual AUTO button

Use when you lost the remote controller or remote control malfunction 
occurs.

Status

Action

Mode or operation

In operation

Press more than 3 seconds.

Stop

Stopping

Press more than 3 seconds and 
less than 10 seconds.

AUTO

Press more than 10 seconds.
(Only for servicing.*)

Forced cooling

After cleaning

Press less than 3 seconds.

Filter indicator reset

*:To stop forced cooling, press this button or START/STOP button on 

the remote controller.

3 Front 

panel

4 Vertical 

air

À

 ow direction louver

Each time you press SET button on the remote controller, the angle 
of the vertical air

À

 ow direction louver moves as follows:

1

2

3

4

5

6 7

COOL or DRY mode

HEAT mode

1

2

3

7

6

5

*

*

4

*: Default setting in each mode.

• Do not adjust by hand.
• At the beginning of AUTO or HEAT mode, they may stay position 1 

for a while for adjustment.

• If you set the angle to position 4–7 for more than 30 minutes in 

COOL or DRY mode, they automatically return to position 3.

  In COOL or DRY mode, if the angle is set to position 4–7 for many hours, 

condensation may be formed, and the drips may wet your property.

5 Power 

diffuser

In conjunction with movement of the vertical air

À

 ow direction louver, 

the angle of the power diffuser moves as follows:

Vertical air

À

 ow 

direction louver

Power diffuser

3

7

6

5

4

2

1

3

2

1

4

• In SWING operation, power diffuser does not move.

6 Drain 

hose

Remote control signal receiver

 

CAUTION

For appropriate signal transmission between remote controller and 
the indoor unit, keep the signal receiver away from following items:

 

- Direct sunlight or other strong light

 

- Flat-panel television screen

In rooms with instantaneous 

À

 uorescent lights, such as in-

verter type ones, the signal may not be transmitted properly. In 
such a case, consult the store that you purchased the product.

ECONOMY indicator (green)

Lights in ECONOMY operation and in 10 °C HEAT operation.

TIMER indicator (orange)

Lights in TIMER operation, and blinks slowly when the timer setting 
error is detected.
As for the timer setting error, refer to “Auto-restart function” on page 5.

10  OPERATION indicator (green)

Lights in normal operation, and blinks slowly in automatic defrosting 
operation.

6

1

3

4

5

8

9

10

11

13

2

12

7

11  Horizontal air

À

 ow direction louvers

 

CAUTION

Before you adjust the horizontal air

À

 ow direction, make sure that 

the vertical air

À

 ow direction louver has been stopped completely.

Adjust two knobs by hand.

See page 6

12  Air 

¿

 lter

Easy-to-care air 

¿

 lters resist mildew growth.

See page 7

13  Air cleaning 

¿

 lters

Purify or deodorize the air, and provide fresh air

À

 ow.

 Indoor unit accessories

Remote 
controller

Batteries

Air cleaning 

¿

 lters

Filter holders

Remote controller 
holder

Tapping screws
(M3 × 12 mm)

 

WARNING

Take care to prevent infants and young children from acciden-
tally swallowing the batteries.

Remote controller holder installation

3

2

1

Screws

Insert

Slide up

Indoor Unit Overview and Operations

9333003047_OM.indb   2

6/28/2013   11:46:12 AM

Содержание aoyg09lmca









Отзывы: