Fujitsu AB*G18LVTB Series, Дизайн и техническое руководство

Страница: 288 / 356

- (05-59) -
SY
ST
EM
DE
SIGN
SY
ST
EM
DE
SIGN
FUNCTION SETTING
„ „
3) Pressing the SET BACK button, select a remote controller address (select the indoor unit
you want to operate).
Ex.) When remote controller address “00” is
selected
Remote controller address
4) Pressing the SET TIME < button or the SET TIME > button, to select the function number.
Function number
5) Pressing the SET TEMP. V button or the SET TEMP. Λ button, to select the setting number.
The display flashes during setting number selection.
Ex.) Function number : 30, Setting number : 01
Setting number
6) Pressing the TIMER SET button, confirm the setting.
(The data will be transferred to the indoor unit.)
GOOD
ERROR
When the data was not set up on the indoor ●
unit (-- is displayed.)
Set up the data again according to the
●
procedure in step 6), 7) above.
When the data was normally set up on the indoor
unit
(Flashing display changes to illuminated display.)
FUNCTION DETAILS
„ „
Refer to 6-6. FUNCTION DETAILS