Fujitsu AB*G18LVTB Series, Дизайн и техническое руководство

Страница: 242 / 356

- (05-13) -
SY
ST
EM
DE
SIGN
SY
ST
EM
DE
SIGN
PIPING TO OUTDOOR UNIT 2-2.
PIPING METHOD
„ „
Knock out
„ z
CAUTION
Be careful not to deform or scratch the panel while opening the knock out holes. •
To protect the piping insulation after opening a knock out hole, remove any burrs from the edge •
of the hole. It is recommended to apply rust prevention paint to the edge of the hole.
Pipes can be connected from 4 directions, front, lateral side, rear side and bottom. (Fig. A) •
When connecting at the bottom, remove the service panel and piping cover on the front of the •
outdoor unit, and open the knock out hole provided at the bottom corner of the piping outlet.
It can be installed as shown on “Fig. B” cutting out the •
2 slits as indicated on “Fig. C”. (When cutting slits, use a steel saw.)
Fig. A
Front connection Lateral connection Bottom connection
(No. 1)
Rear connection
Service panel
Fig. B
Slit
Slit
Fig. C
Bottom
connection
(No. 2)