En-5
AIR CONDITIONER Wall Mounted Type
OPERATING MANUAL
Timer Operation
Note for timer settings:
Any interruption of the power supply, such as a blackout or cutting off of a circuit breaker, makes the set internal clock incorrect.
In such a case, the TIMER indicator on the indoor unit blinks, and you need to readjust the setting.
ON timer or OFF timer
1
Turn on the indoor unit by pressing the START/STOP button.
OPERATION indicator on the indoor unit turns on.
If the indoor unit is already operating, skip this step.
2
Press the ON timer button or the OFF timer button.
Clock indicator on the remote controller display starts blinking,
and TIMER indicator on the indoor unit turns on.
3
Adjust the time by pressing the SELECT button within about 5
seconds, while the clock indicator is blinking.
(About 5 seconds later, the remote controller display returns to
standby screen.)
To cancel the timer and return to normal operation, press the CANCEL
button.
To redo the timer setting, perform step 2 and 3.
Program timer (combined use of the ON timer and the OFF timer)
You can set an integrated ON–OFF or OFF–ON timer.
Either of the timer whose configured starting time is closer to the
current time works first, and the order of timer operation is displayed
as follows:
Timer
Indicator on remote controller display
ON–OFF timer
OFF–ON timer
The timer that is set later starts counting down after the counting
down of the preceding timer is finished.
To set the program timer, conduct the same steps 2~3 for the ON/
OFF timer.
Notes:
• If you change the setting value for the timer after the program timer
is set, the counting down of the timer will be reset at that moment.
• Time setting for each combination should be within a span of 24 hours.
SLEEP timer
1
Press the SLEEP timer button to activate the SLEEP timer.
OPERATION indicator and TIMER indicator on the indoor unit turns on.
2
Adjust the time by pressing the SELECT button within about 5
seconds, while the clock indicator is blinking.
(About 5 seconds later, the remote controller display returns to
standby screen.)
Each time you press the button, the time changes as follows:
9.0
7.0
5.0
3.0
2.0
1.0
0.5
hours
(30 min.)
To repeat the timer, press the SLEEP timer button when
indicator is not displayed on the remote controller display.
To help you to fall asleep comfortably and prevent excessive warming
or cooling in sleep, the SLEEP timer controls the temperature setting
automatically in accordance with the set time shown as follows. The
air conditioner completely turns off after the set time has elapsed.
In HEAT mode
Set
temperature
Set time
1 hour
Set time
1 hour
1.5 hour
30 min.
1 °C 2 °C 3 °C 4 °C
2 °C
1 °C
In COOL or DRY mode
90°
7 m
7 m
50°
50°
● Application range is follows.
Vertical angle 90° (Side view)
Horizontal angle 100° (Top view)
ENERGY SAVING function may not work when the room temperature is
very different from the temperature defined in temperature setting, such
as when immediately after starting the operation.
About the HUMAN SENSOR
●
Details about detection with the human sensor
●
The human sensor detects whether there are people in the room
by looking for movement by people in the room.
●
Since the human sensor detects infrared light given out by
people, there may be cases where this detection is incorrect.
Situations in which the sensor will detect no people in the
room, even when there is someone there
●
When the temperature is high and the difference with
between people’s body temperature is small.
(Such as during the summer when the temperature is 30˚C
or higher)
●
When there is someone in the room, but they do not move
for a long period of time.
●
When someone is hidden behind a sofa, other furniture,
glass, or in similar situations.
●
When someone is wearing extremely thick clothing and has
their back facing the sensor.
Situations in which the sensor will incorrectly detect people
in the room, even when there is no one there
●
When there is a dog or a cat moving around in the room.
●
When the wind is making curtains or plants move.
●
When there are heating units, humidifiers, or electric
appliances such as oscillating electric fans operating.
Notice
To prevent waste of electricity, this function controls the temperature
setting when no one is occupying the room. Energy Saving program is
on at the time of purchase.
1
To activate the Energy Saving program, press the SENSOR
button.
indicator will be flashing on the remote controller
display.
2
To deactivate the Energy Saving program, press the SENSOR
button again.
will no longer be shown on the remote controller
display.
About the ENERGY SAVING Operation
If no one enters the room for approximately 20 minutes, the set
temperature will be automatically controlled.
(When someone comes back into the room, the human sensor will
detect this, and automatically revert to the original settings.)
Operation
mode
Operating details
(if there is no one in the room for a while)
COOL/DRY The set temperature will be increased by a maximum of
approximately 2˚C.
HEAT
The set temperature will be decreased by a maximum
of approximately 4˚C.
AUTO
This runs the ENERGY SAVING function automatically
for the selected mode (Cooling/ Heating/ Drying).
● When using together with the SLEEP timer (page 5), the SLEEP
timer will be prioritized.
● During 10°C HEAT operation, if there is no one in the room the set
temperature will not be changed.
Human Sensor (Energy Saving)
9333003030-02_OM_EN.indd 5
10/6/2014 11:01:45 AM
