Installing and removing drives
System expansions
A26361-K554-Z100-2-7619
35
Ê
Disconnect the cables from the hard disk drive (4).
Replacing a hard disk drive
Ê
Remove the screws.
Ê
Take the new hard disk drive out of its
packaging.
Ê
Make the required settings (e. g.
master/slave, stand alone) on the drives.
Ê
Replace the hard disk drive.
Ê
Fasten the drive with the screws.
Installing the hard disk carrier
1
2
4
1
3
Ê
Connect the cables to the hard disk drive (1).
Ê
Insert the hard disk carrier in the guide rail provided for this purpose on the casing (2, 3).
Ê
Fasten the hard disk carrier with the screw (4).
Ê
Close the system unit (see "
Assembling the system unit
").
i
If necessary, you must adapt the entry for the drive in the Setup menu.
