System expansions
Installing and removing drives
32
A26361-K554-Z100-2-7619
Removing an accessible drive
Ê
Open the system unit (see "
Opening the system unit
").
1
3
2
2
Ê
Pull the data and the power supply connectors from the desired drive (1).
Ê
Remove the screws (2) and take the drive out of the system unit (3).
!
For cooling, protection against fire and in order to comply with EMC regulations, you must
refit the shielding plate.
A
B
Ê
Insert the shielding plate (B) on the right-
hand side on the installation bay and press
it in.
Ê
Press the plastic drive cover (A) into the
front panel until it snaps in place.
Ê
Close the system unit (see "
Assembling
the system unit
").
i
If necessary, you must adapt the entry for the drive in the Setup menu.
