Troubleshooting and tips
Time and/or date is not correct
32
A26361-K831-Z101-1-7619
Time and/or date is not correct
You can set the time and date in the
BIOS Setup
or in the operating system.
Ê
Set the time and date.
i
If the time and date are repeatedly wrong when you switch on your server, the on-board
battery is flat. Change the lithium battery as described in the "Replacing lithium battery"
chapter.
Error messages on the screen
Error messages and their explanation are contained:
·
in the technical manual for the system board
·
in the "BIOS Setup" manual
·
in the documentation for the programmes used.
Restoring the hard disk contents
Instructions for this purpose can be found in the documentation (booklet) of the "Drivers & Utilities"
CD.
Tips
The server cannot be switched off with the power button
Cause: The server was not switched on with the power button.
Ê
Press the power button again.
Cause: System crash
Ê
Press and hold the power button for at least four seconds until the device switches off.
Out of system resources
If you have too many applications running at once, you may experience problems due to a lack of
system resources. In this case you should:
Ê
close unnecessary applications
or
Ê
run the applications in a different order.