Fujitsu Siemens Computers CELSIUS MOBILE 810 Скачать руководство пользователя

Страница: 39 / 82

Operating the CD-ROM drive and the DVD drive

Preparation for use and operation

A26391-K82-Z110-1-7619

Inserting or removing a CD/DVD

The workstation must be switched on.

Press the insert/eject button for roughly one second.

The CD/DVD tray will open.

Pull the CD/DVD tray completely out.

Place the CD/DVD in the CD/DVD tray with the labeled side facing upwards, and carefully push
the CD/DVD into the mount or remove an inserted CD/DVD.

Push the CD/DVD tray in until you feel it locking into place.

Manual removal (emergency removal)

In the event of a power failure or damage to the drive it may be necessary to manually remove the
CD/DVD.

Switch off the workstation.

Press a piece of wire (e. g. a paper clip) firmly into the opening.

Содержание CELSIUS MOBILE 810



















































































Результаты поиска

Содержание CELSIUS MOBILE 810

Отзывы:

Похожие инструкции для CELSIUS MOBILE 810

Бренды по названию

Популярные бренды

Fujitsu Siemens Computers CELSIUS MOBILE 810, Руководство по эксплуатации

Результаты поиска

Содержание CELSIUS MOBILE 810

Отзывы:

Похожие инструкции для CELSIUS MOBILE 810

Бренды по названию

Популярные бренды