Preparation for use
Connecting to the computer
By utilizing the PC USB cable included with the product, you can charge the main unit
by connecting it to the PC.
1. Connect the USB cable to the USB port of the computer.
2. Connect the other side of the USB cable to the connecting terminal on the bottom of
XXS.
3. With a message saying a new device is found, the USB driver will be installed.
The installation screen might not be shown.
Check whether it has been properly installed by checking the Device Manager.
4. When the USB driver is installed, you will see the [XXS USB Device] in [Device
Manager].
※ If you disconnect the USB cable while installing the USB driver initially or while
executing a command, it might cause an error in the PC.
Windows 98SE users must first install the USB driver before connecting the MP3player