Positioning
The edges of the hob must be a minimum distance of mm from a side or
rear wall.
At least
750
mm between the highest point of the hob surface (including the
burners) and the underside of any horizontal surface directly above it.
400 mm between the hob surfaces, providing that the underside of the
horizontal surface is in line with the outer edge of the hob. If the underside of
the horizontal surface is lower than 400 mm, then it must be at least 50 mm
away from the outer edges of the hob.
50 mm clearance around the appliance and between the hob surface and any
combustible materials.
5
0
mm
60
You must have a gap of at least 25 mm and at most 74 mm between
the underneath of the appliance and any surface that is below it.
1
7
o
o
o
o
o
This appliance is to be built into a kitchen unit or 600mm worktop,providing
the following minium distances are allowed;
- An oven must have forced ventilation to install a hob above it.
- Check the dimensions of the oven in the installation manual.
- The cut out size must obey the indication.
4-R60
FA
RA
650-720mm
345-420mm
≈ 600
4-R60
FA
RA
685-820mm
385-470mm
≈ 600
FH-GS6020 SVGL/SVSS
FH-GS6030 SVGL/SVSS
≥
750mm
400mm
400mm
≥
750mm
400mm
400mm
Model
FH-GS6020 SVGL
W650xD350
W705xD405
FA25xRA95 W(650-720)xD(345-420)xR60
50
50
FA25xRA100 W(685-820)xD(385-470)xR60
FH-GS6020 SVSS
FH-GS6030 SVGL
FH-GS6030 SVSS
Cut Out Dimension(mm)
Replacement size(mm)
Height(mm)
Содержание FH-GS6020 SVGL
Страница 1: ...FH GS6020 SVSS FH GS6030 SVSS FH GS6020 SVGL FH GS6030 SVGL ...
Страница 24: ......