Cleaning and Maintenance
1
5
2
1
3
4
5
6
7
1.Place the flame spreader ( 4 ) on to the burner cup ( 5 ) so that the ignition device
( 6 )
and the flame supervision device
( 7 )
extend through their respective holes in the
flame
spreader.The flame spreader must click into place correctly.
2.Position the burner
cap
( 1,2,3 ) onto the flame sp
r
eader ( 4 ) so that the retaining
pins
fit into their respective recesses.
■ Remove the burner
cap
and Flame Spreaders by pulling them upwards and away
from the top plate.
■ Soak them in hot water and a little
detergent or washing up liqui
d
.
■ After cleaning and washing them, wipe and dry them carefully. Make sure that the
flame holes are clean and completely dry.
■ Wipe the fixed parts of the burner cup with a damp cloth and dry afterwards.
■ Gently wipe the ignition device and flame supervision device with a well wrung-out
cloth and wipe dry with a clean cloth.
■ Before placing the burners back on the top plate, make sure that the injector is not
blocked.
%851(56
ʄ5HDVVHPEOHWKH6HPL5DSLGDQG
7ULSOH&URZQEXUQHUVDV
5HSODFHSDUWVLQWKHFRUUHFWRUGHUDIWHUFOHDQLQJ
'RQRWPL[XSWKHWRSDQGERWWRP
7KHORFDWLQJSLQVPXVW¿WH[DFWO\LQWRWKHQRWFKHV
IROORZV
Содержание FH-GS6020 SVGL
Страница 1: ...FH GS6020 SVSS FH GS6030 SVSS FH GS6020 SVGL FH GS6030 SVGL ...
Страница 24: ......