Fujinet CVR5104HG, Руководство пользователя

Страница: 30 / 142

HDCVR
- 30 -

Event type: From the dropdown list you can select motion detection type.

Channel: Select a channel from the dropdown list to set motion detect function.

Enable: Check the box here to enable motion detect function.

Region: Click select button, the interface is shown as in Figure 3-25. Here you can set
motiondetection zone. There are four zones for you to set. Please select a zone first and then left
drag themouse to select a zone. The corresponding color zone displays different detection zone.
You canclick Fn button to switch between the arm mode and disarm mode. In arm mode, you can
click thedirection buttons to move the green rectangle to set the motion detection zone. After you
completedthe setup, please click ENTER button to exit current setup. Do remember click save
button to savecurrent setup. If you click ESC button to exit the region setup interface system will not
save yourzone setup.
Sensitivity: System supports 6 levels. The sixth level has the highest sensitivity.
Figure 3-20

Anti-dither: Here you can set anti-dither time. The value ranges from 5 to 600s. The anti-dither
timerefers to the alarm signal lasts time. It can be seem as the alarm signal activation stays such as
thebuzzer, tour, PTZ activation, snapshot, channel record. The stay time her e does not include
thelatch time. During the alarm process, the alarm signal can begin an anti-dither time if system
detectsthe local alarm again. The screen prompt, alarm upload, email and etc will not be activated.
Forexample, if you set the anti-dither time as 10 second, you can see the each activation may last
10sif the local alarm is activated. During the process, if system detects another local alarm signal at
thefifth second, the buzzer, tour, PTZactivation, snapshot, record channel will begin another
10swhile the screen prompt, alarm upload, email will not be activated again. After 10s, if system
detectsanother alarm signal, it can generate an alarm since the anti -dither time is out.

Period: Click set button, you can see an interface. Here you can setmotion detect period. System
only enables motion detect operation in the specified periods. It is notfor video loss or the