Fujinet CVR5104HG, Руководство пользователя

Страница: 16 / 142

HDCVR
- 16 -
Please go to the Main Menu->Setting->->System->General to set real-time playback time.

Support drag and play function. You can use your mouse to select any playback start time.

Support playback, pause and exit function.

Right now, system does not support slow playback and backward playback function.

Support digital zoom function.

Support real-time backup function.
You can follow the contents listed below for the operation instruction.
Preview control interface
Move you mouse to the top centre of the video of current channel, you can see system pops up the
preview control interface. See
错误！未找到引用源。
. If your mouse stays in this area for more than 6
seconds and has no operation, the control bar automatically hides.
Figure 3-4
You can refer to the following sheet for detailed information.
SN Name Function
1
Realtime playback It is to playback the previous 5-60 minutes record of
current channel.
Pleasego to the Main
Menu->Setting->->System->General to set real-time
playback time.
System may pop up a dialogue box if there is no such
record in current channel.
2
Digital zoom
It is to zoom in specified zone of current channel. It
supports zoom in function of multiple-channel.
Clickbutton , the button is shown asDrag the
mouse or use the middle button to select a zone, you
can view.
Right click mouse to cancel zoom and go back to the
original interface.
3
Real-time backup
function
It is to backup the video of current channel to the
USB device. System can not backup the video of
multiple-channel at the same time.
Clickbutton
,system begins recording. Click it
again, system stops recoridng. You can find the
record file on the flash disk.
playback control
The playback control has the following features.

Support play, pause, and exit and drag function.
1 2 3