FujiFilm Pivi MP-300 Скачать руководство пользователя страница 21

40

41

Error

Error

x

  The date printed is the date included in the transmitted data.

x

  If the image has been edited (such as by adding a frame after the picture was 

taken), the image’s recorded date may be overwritten.

x

  Date mode supports EXIF-format data.

x

  The printed date may be diffi cult to see against some backgrounds. The date 

color cannot be changed.

x

  Date information that was added by a sending device may not be printed 

correctly.

If date mode is selected and the image 
sent has no date information or has date 
information that is not EXIF data, the 
ERROR lamp blinks 3 times, the DATE 
lamp blinks 7 times at the same time 
and the image cannot be printed.
Cancel date mode and then resend the 
image or send a different image.

 When an image with no date information is sent 

Blinking (3 times)

Blinking (7 times)

DATE Mode

Date printing position

2006.06.06

2006.06.06

2006.06.06

2006.06.06

2

0

0

6

.0

6

.0

6

2006.06.06

2

0

0

6

.0

6

.0

6

2006.06.06

When PictBridge is used

Set date mode on the digital camera.

x

  For information on setting date mode on your digital camera, refer to the 

owner’s manual for the camera.

Take the measures described below to restore printer operation.
<Operating temperature too low>
 Use the printer at +5°C (+41°F) or higher or warm the 
printer at body temperature for around 10 minutes.
<Operating temperature too high>
Use the printer at +40°C (+104°F) or lower or 
move the printer to a cool location.

 When the ERROR lamp lights 

Only use b5°C and +40°C (+41°F and +104°F).

Operating temperature too high or too low.

ERROR - ERROR lamp -

See “When an image with no date information is 
sent”. (P.40)

Date mode error

See “Troubleshooting USB communication 
problems”. (P.46)

PictBridge communication error

Lit 

(Approx. 7 sec. 

 Power off)

Check image size/format. (P.9, 33)

x

  If a Progressive JPEG image is sent, the 

POWER button may blink.

Case 1.  Cannot print transferred data.

Transfer an image.

Case 2.  No stored image for “Reprint”.

Blinking 

(3 times)

Lit

Lit

Blinking
(3 times)

Blinking
(3 times)

Blinking

(7 times)

Blinking

(7 times)

Blinking
(3 times)

Blinking
(3 times)

Blinking
(3 times)

Blinking
(3 times)

Lit

Lit

Содержание Pivi MP-300




























Отзывы: