21
Basic
Insert a film.
While holding the film cassette, pull the end of
the film out to the
FILM TIP
mark, and place
it on top of the spool.
Close the camera back.
The film advances to the first frame automatically.
Check the number on the film counter.
If the film is not loaded properly, “
” blinks on the film
counter and the shutter cannot be released. Load a
film again making sure it is loaded properly.
If the film cassette is not set properly, the camera back
cannot be closed completely.
If film is pulled out too far, take the film out and adjust the
length of film. Note that the front part of the film may be
exposed when it is pulled out too far.
The type, rolls, and film speed of the film can be checked
through the film confirmation window.
