FujiFilm FRONTIER 390, Инструкция по эксплуатации

Страница: 7 / 173

5
1
OPERATIONAL SAFETY AND USE CONDITIONS
Before using the equipment, carefully read and thoroughly understand the
precautions set forth in this section.
The safety precautions are classified into WARNING and CAUTION categories.
Supplementary operating instructions are given under IMPORTANT and NOTE
categories.
These four categories are defined as follows.
WARNING indicates a potentially hazardous situation which, if not avoided,
could result in serious injury or even death.
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury. It may also be used to alert against unsafe
practices and property-damage-only accidents.
IMPORTANT
IMPORTANT describes improper handling procedures that may adversely
affect performance or damage the equipment.
NOTE:
NOTE designates those items, provisions, and supplementary explanations for
which it is important to maintain methodical concern and consideration relative to
operational procedures.
1.1
Safety
............................................................................................... 6
1.1.1 Basic Operating Precautions ............................................... 6
1.1.2 Caution regarding Electric Shock ......................................... 6
1.2
Laser Radiation Safety
........................................................... 7
1.2.1 Laser Radiation Safety ......................................................... 7
1.2.2 Laser Warning Label ............................................................ 7
1.3
Safety Indication
........................................................................ 8
1.3.1 Caution Label Locations on Scanner/Image Processor ....... 8
1.3.2 Caution Label Locations on Printer/Paper Processor .......... 10
1.3.3 Laser Caution Label Locations on Printer ............................ 12
1.4
Room Conditions
...................................................................... 13
1.5
CRT Monitor and Main Control Unit Handling Precautions
.......... 14
1.5.1 CRT Monitor ......................................................................... 14
1.5.2 Main Control Unit ................................................................. 14
1.6
Processing Chemical (CP-48S) Handling
.................... 15
1.6.1 Handling Precautions ........................................................... 15
1.7
Certification and Identification Labels
.......................... 16
1.7.1 Certification and Identification Label Locations .................... 16