128
Installation on a Mac OS X
Pre-installation checklist
Z
Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
*
1
PowerPC, Intel processor loaded
*
2
Models with a USB port as a standard feature
CAUTION
• Connect the camera directly to the Macintosh using the USB cable (included). The software may not operate correctly if you use
an extension cable or connect the camera via a USB hub.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
Compatible Mac
*
1
Power Macintosh G3
*
2
, PowerBook G3
*
2
,
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5,
MacBook, MacBook Pro, Mac mini, or Mac PRO
Operating System
Mac OS X (compatible with version 10.3.9 to 10.4.10)
RAM
256 MB minimum
Hard disk space
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
Display
800 × 600 pixels or better, at least 32,000 colors