FujiFilm Finepix S3000, Руководство по обслуживанию

Страница: 67 / 82

67
5.Inspection
1
Externals
Auto
photography
LCD_ON
Preparations for adjustment
(measurement point, subject, other)
Sequence
Check item
Mode
Method of adjustment
(VRs, waveforms, required, values)
Measuning
equipment and jigs
Measurement point
(VRs, position)
The camera is watched.
1)Set the battery in the camera.
2)The xD card is inserted,.
3)Close slot cover.
4)Set the mode dial.
5)Turn on the power swich. (POWER_ON)
6)Push the BACK button when the message
to press the date setting appears.
7)Display state confirmation
8)CCD through picture bristletail confirmation
1)No problem with click action of swiches.
2)No dust or fogging of viewfinder.
3)No dust or fogging of LCD.
3
2 Power supply
switch
Zoom operation
Auto
photography
LCD_ON
1)Zoom operation sound
2)Finder confirmation
3)Zoom T-W operation
1)Applied voltage: 4.5V with for AA-sizeed batteries.
2)Recording check card.
4)Mord: Still image
5))Finder LED (green) lights and beep sound occurs.
6)<BACK>
7)Through picture and character are displayed.
8)Thing that doesn't darken when "Through image of
camera" catches "High luminance object".
1)There must not be Hira Boke.
2)It synchronizes with the zoom operation of the lens.
3)Operate smoothly.
4
Auto shooting
mode
Shock noise
Auto
photography
LCD_ON
Give the camera body moderate
shock.
Thing that LCD monitor is normally displayed
Return even if there is synchronous disorder.
Do not shake the lens and the battery cover part directly.
5 Resolution
Focus
1)Make subject a resolution chart for the macro.
2)Set it to the macro mode.
3)Flash Pop-Up/Down
4)Set up the camera so that the chart
may become a full angle of field.
5)Push, and take a picture of the
Shutter button.
2)Push the[Macro botton (left)].
3)Push the[Pop-up botton] ->Flash Unit Push-down.
5)Finder LED > green lighting > orange lighting
(recording) > green lighting.
6 Movie(Recording) Movieo
photography
LCD_ON
1)Change to the movie recording mode.
2)Shutter button Half on > All on
All on > Haif on > Release >.
3)Half on after five seconds > Release.
"STANDBY" must be displayed in the LCD monitor.
Start the movie recording."REC" display must appear in
the LCD monitor. The movie recording ends, and it is
recorded on the card.
7 Movie (playback)
Playback 1)Change to the playback mode.
2)movie playback.
Play back the movie in the LCD monitor.
8
Playback mode Playback
1)Insert the xD Picture card in the camera.
2)Change to the playback mode.
3)Turn on the power swich. (POWER_ON)
4)Push the [BACK] button when the
message to press the date setting
appears.
5)Playback image confirmation
<BACK>
Display the image recorded at the last.
Display at the date must be the following order.
“YYYY.MM.DD”
9 Deletion mode Delete
1)[ERASE] > [ALL ERASE] is selected from
the menu and [MENU/OK ] button is pushed.
2)Push [MENU/OK] button again.
"ERASE ALL OK?" The message must be displayed.
record image is deleted.
10 Playback 1)Play back all black image.
2)Play back all white image (75%).
LCD moniter
LCD
There must be neither garbage nor a dirt defect that
stands out in the screen.
Measuring equipment Remarks
Power supply AC adapter (AC-5VH / AC-5VHS), stabilized power supply
Digital voltmeter For general use
Ammeter For general use (able to measure 1mA or less)
power cable jig For general use
xD-Picture card For general use
TV-Monitor For general use (Resolution 600 or more)
5.Inspection
5-1.Required Measuring Equipment
5-2.Connection of Measuring Equipment
5-3.Inspection and Factory Setting