101
6
100
DC IN 5V socket
Always use a FUJIFILM AC Power Adapter AC-
5VW/AC-5VS/AC-5VHS (
➡
P.7, 110).
Use the AC power adapter to avoid losing power
at inconvenient times, such as when you are
downloading photographed images to your
computer. Using the AC power adapter also
allows you to take pictures and play back images
without worrying about depleting the batteries.
✽
See P.115 for notes on using the AC power adapter.
✽
Only connect or disconnect the AC power adapter
when the camera is switched off.
Connecting or disconnecting the AC power adapter
while the camera is switched on temporarily interrupts
the power supply to the camera, so that images or
movies being shot at the time are not recorded.
Failing to switch the camera off first can also result in
damage to the xD-Picture Card or malfunctions during
PC connection.
Check that the camera is switched off. Plug the
AC power adapter connector into the “DC IN 5V”
socket and then plug the AC power adapter into
the power outlet.
✽
The socket-outlet shall be installed near the equipment
and shall be easily accessible.
✽
The shape of the plug and socket-outlet depends on
the country of use.
USING THE AC POWER ADAPTER
(USB)
socket
DC IN
5V socket
Camera
OFF
ON
USB
socket
PC
1. Load an xD-Picture Card containing
photographed images into your camera. Plug
the AC power adapter connector into the DC
IN 5V socket on the camera and then plug
the adapter itself into the main power outlet.
2. Slide the power switch to the side to turn
the camera on.
3. Set the “USB MODE” setting in the
“SET–UP” menu to “
•
” (
➡
P.82, 83).
4. Slide the Power switch to the side to turn
the camera off.
5. Switch your PC on.
6. Use the special USB cable to connect the
camera to your computer.
7. Switch the camera on.
If you are using a Windows PC, the driver settings
are specified automatically when installation is
completed. No further action is required.
Always use the prescribed procedure when
disconnecting or switching off the camera
(
➡
P.104).
✽
On Windows XP and Mac OS X, you must specify the
automatic launch settings the first time you connect
the camera to your computer.
✽
Take care to ensure that the special USB cable is
connected the correct way around and that the plugs
are pushed fully into the connection sockets.
0
1
0
4
0
2
0
3
0
6
USE AT DSC MODE
