FujiFilm FinePix F30, Руководство по обслуживанию

Страница: 85 / 111

85
4. Adjustments
FinePix F30 Service Manual
4-17. [F12] : End Setting
(Destination setting, USB ID write, Product mode setting)
1. The End setting consist of the following settings.
* Destination setting
* USB ID write
* Product mode setting (mass storage identification)
2. The setting must always be run when the adjustment software is terminated. Failure to run Terminal Setting will prevent
identification as Mass Storage when the camera is connected to the PC.
3. USB ID write details
1) USB ID write requires that the USB device (in this case FinePix F30) be unique throughout the world. For this reason,
each device has a unique ID as determined by the USB standard. If multiple devices with the same USB ID are connected
to a single PC, the PC will be unable to identify each USB device, thus preventing operation.
Item Details
Repair Date Date information is acquired from the PC and written.
Administrator ID 01(01)
Repair Station
U.S.A. 61(a) SAPPORO 30(0)
CANADA 62(b) SENDAI 31(1)
HAWAII 63(c) TOKYO 33(3)
TAIWAN 64(d) NAGOYA 34(4)
ENGLAND 66(f) OSAKA 35(5)
GERMANY 67(g) HIROSHIMA 37(7)
FRANCE 68(h) FUKUOKA 38(8)
SPAIN 69(i)
ITALY 6A(j)
NETHERLANDS 6B(k)
BELGIUM
6C(l)
SWEDEN 6D(m)
SWITZERLAND 6E(n)
NORWAY
6F(o)
FINLAND 70(p)
SINGAPORE 71(q)
CHINA 74(t)
OTHER 7A(z)
Repair Serial No. A serial No. is assigned automatically and written