FujiFilm FinePix A310 AS, Руководство по обслуживанию

Страница: 49 / 74

49
FinePix A310 Service Manual
4. Adjustments
Fig.23
4-15. [F1] : Battery voltage adjustment
Caution:
1. When running battery adjustment, supply power (3V) to the camera using the Battery jig before setting the camera to
the Jig mode.
2. Always measure input voltage close to the battery connector.
3. When reducing voltage, ensure that it is not reduced excessively from the measured value, and adjust the regulated
power supply. Failure to do so may result in interruption of communication between the adjustment software and the
camera, and the adjustment software may produce an error. Restart the adjustment software in this case.
<Step 1>
1. Connect as shown in the connection diagram.
Run the adjustment in accordance with the instructions on the screen.
2. Place the camera lens upwards (as the lens will operate, care is required).
When preparations are complete, select [F1] from the [Adjustment Items Select Screen (Fig.5)] .
(press the [F1] key on the keyboard)
---> The [Battery Voltage Preparation Screen (Fig.23)] appears.
<Step 2>
When preparations are complete, press the Enter key.
OS:Windows 98 OS:Windows 98
DC-3V
USB CABLE
FX-A310
USB jig
Regurated
Power Supply
DC 3.00V
Multi meter