Main Body
Please unplug the AC power cord before maintenance.
(It may cause electric shock and injury.)
Unplug
Warning
How to install the front filter
How to turn off the indicator
Clean with soft cloth.
Clean it with cloth soaked
with water or warm water
(below 40
ഒ
).
When it is very dirty
Avoid using the following items.
dz
Do not dismantle, modify and repair the device.
High voltage components are built in the device
and it is dangerous if you touch it.
Warning
After plugging in the AC power cord, please press the power
button and hold it until the indicator is off (approximately over 3 seconds).
21
①
②
Put back the front filter to the original position inside the air inlet. Slide it in with the
help of two fingers pushing at two corners of the filter until it fits in.
In case you find it difficult to fit it in, try to relax and let it fall back a little bit, and then
slightly lift it up and push it back slowly. When it fits to its place, you will hear a click
sound to confirm it is fixed (same applies to left and right sides).
They may damage the surface and the liquid may
penetrate into inner parts (precision parts). Such
may cause failure.
ɜ
ɜ
ɜ
ɜ
ɜ
ɜ
ɜ
ɜ
ɜ
Thinner
Benzene
Alcohol
Oven cleaner
Cleanser
Bleach
Synthetic detergent for home use (alkaline)
Spray-type detergent
Metal scrubbing brush
Filter reset
Press & Hold
Button
