Control Panel
Avoid putting it near the air outlets of
air conditioners and heaters
and windows.
(It may cause deformation,
discoloration and error.)
Keep it away from direct sunlight.
(It may cause deformation,
discoloration and error.)
Avoid putting it near home appliances
such as television and radio etc.
(more than 1m)
(It may disturb the clarity
of image and sound.)
Avoid putting it at an
unstable place.
Power button
Operation light
PGG
XFBL
NJME
TUSPOH
Air Volume
Condition
Air volume lamp
Stop operation
PGG
Quiet operation mode
Normal operation mode
Quick deodorization mode
more than 1m
Flashing (red)
→The unit has failed
ǾǾ
page 11
page 9
Light on (orange)
without flashing
→Clean the front filter
1 lamp
2 lamps
3 lamps
Air volume lamp
9
(It may cause failure due
to turning over.)
Filter reset
Error
Clean filter
Press & Hold
Button
Using the device
How to remove the front filter
Cleaning and Maintenance
Front filter
without flashing(orange)
(clean the front filter)
How to clean the front filter
:
①
②
③
①
②
③
MaSSC Clean MC-VII is equipped with front filters inside the air
inlets to prevent dirt from getting into the inner part of the device.
The front filters are required for cleaning regularly. The indicator
on the top of the power button will be lighted (orange colour) after
every 720 hours of operation. When the indicator is on, please
clean the front filters.
Note: If the indicator flashes (red colour),
it means the unit has failed. Please refer to page 11.
In case where it is difficult to identify the colour of the indicator (orange and
red), you may identify it by seeing that “no flashing means cleaning” and
“flashing means error”.
Please use a nozzle for gap cleaning of the vacuum cleaner
or a brush (used tooth brush etc.) to clean away dust.
If it is very dirty, please see the following instructions to
remove the front filter for cleaning. Please note that it may
cause failure if it is washed. Please do not get it wet.
Please unplug the AC power cord first. The front filter is installed inside the air inlet
(left and right sides, 2 locations). Pull the tab at the centre towards yourself to
make it off the hook and slide it out.
When it is off the hook, it will slide out the air inlet.
Filter reset
Error
Clean filter
Press & Hold
Button
