Fuji Xerox DocuColor 5065II, Руководство пользователя

Страница: 59 / 416

Copying Procedure
57
Cop
y
4
1
Remove any paper clips and
staples before loading the
documents.
2
Adjust the movable document
guides to match the size of the
document loaded.
Note • When loading a large
document such as A3,
pick
up the document feeder
tray and open the
document stopper rightward.
3
Place the document face up (the
face of 2 sided document up) in the
center of the document feeder.
Note • The <Confirmation> indicator
lights up when the document
is loaded correctly.
When loading the document in the
document feeder, you can set timing for
lifting up the document feeder tray. For
more information, refer to "Document
Feeder Tray Elevation" (P.223).
Document Glass
On the document glass, you can place a single sheet, or a book or other similar
document up to 297 x 432 mm (A3, 11 x 17 inches).
The document glass automatically detects standard size documents. For non-standard
size documents, input the size in the [Original Size] field.
For information about entering document sizes, refer to "Original Size (Specifying the Scan Size for the
Document)" (P.74).
Note • The standard document sizes that can be auto-detected depend on the [Paper Size
Settings] in the System Administration mode. For information about paper size settings, refer
to "Paper Size Settings" (P.219).
1
Open the document cover.
Important • Check that the screen of the
control panel is displayed
correctly and then load the
document. When the
document is loaded before the
screen is displayed, the
machine may not properly
detect document sizes.
2
Place the document face down,
and align it against the top left
corner of the document glass.
3
Close the document cover.
Note • When a standard size
document is placed on the
document glass, the size of
the document is displayed in
the message area.