Fuji Xerox DocuColor 5065II, Руководство пользователя

Страница: 260 / 416

8 System Settings
258
S
yst
em S
et
tin
g
s
8
Failed Access Log
In order to detect unauthorized access, if the number of times that authentication fails
within a set time exceeds the [Failed Attempts] value set here, then an error is logged.
1
Select [Failed Access Log].
2
Select [On], and with the numeric
keypad enter the number of
failures.
Passcode Entry from Control Panel
Set whether a Passcode is required when the system administrator or a user is using
the machine.
Select [On] to enable "System Administrator’s Passcode" (P.250), and "Passcode"
(P.253) for [Create/Check User Account].
Select [Off] to not require the Passcode, even if a Passcode is set in the above
procedures.
Important • The setting of [Passcode Entry from Control Panel] is used for verification on the machine. A
Passcode must always be input when accessing from remote devices, regardless of the use
of Passcode setting. Depending on verification procedures, a Passcode may be required for
other processes as well.
Login Setup/Auditron Mode
Set whether the Auditron administration feature is enabled or not, and whether to
request an authentication operation.
1
Select [Login Setup/Auditron
Mode].
2
Select any item.
Off
No user login setup/auditron administration is required to operate the machine.
Note • When [Off] is selected, [Auditron Mode] is disabled even if it is set to [On].
Local Machine Access
The Auditron administration is carried out using the authenticated users already
registered on the machine.