Fuji Xerox DocuColor 5065II, Руководство пользователя

Страница: 122 / 416

4 Copy
120
Cop
y
4
Important • The features set here cannot be changed or cancelled during the operation.
For the features that can be set here, refer to "Features that can be set in Build Job" (P.120).
Features that can be set in Build Job
For information about the feature, refer to "Copy Output (Outputting by Specifying Finishing)" (P.116).
„ Copy Output
For information about the feature, refer to "Output Orientation (Specifying Face Up or Down)" (P.114).
„ Booklet Creation
For information about the feature, refer to "Booklet Creation (Creating a Booklet)" (P.94).
„
Covers
For information about the feature, refer to "Covers (Attaching a Cover to Copies)" (P.97).
Note • Copying cannot be made on covers attached to a build job.
„ Annotation
For information about the feature, refer to "Annotation (Adding Stamp/Date/Page Number to Copies)"
(P.103).
„ Separators
For information about the feature, refer to "Transparency Separators (Inserting Blank Sheets between
Transparencies)" (P.99).
„ Watermarks
For information about the feature, refer to "Watermark (Printing Control Number on Background)"
(P.110).
„ Output Orientation
For information about the feature, refer to "Output Orientation (Specifying Face Up or Down)" (P.114).
[Build Job - Separators] Screen
Separators can be inserted between segments. The number of separator sheets per
segment can be set to from 1 to 99.
Note • The setting can be changed for each segment. Note that the previous setting stays in effect
until you change it.
1
Select any item.
2
Use the numeric keypad or the [ ]
and [ ] buttons to enter the
number of separator sheets to be
inserted.
„ No Separators
Separators are not inserted.
„ Blank Separators
A blank separator is inserted.
After selecting this option, place originals and then press the <Start> button to insert
blank separators.
„ Printed Separator - Side 1