Fuji Xerox DocuCentreS2320 Скачать руководство пользователя

Страница: 207 / 257

Scan Problems

207

roblem

lvin

Unable to Send Scan Data in E-mail

The table below lists possible solutions when you are unable to send a scanned document
as e-mail.

Symptom

Possible Cause

Remedy

Unable to send an
e-mail.

The registered e-mail address
is incorrect.

Check the entered e-mail address.

The maximum data size for
outgoing e-mail was
exceeded.

Lower the resolution, and reduce the size of
the attached data.

Refer to "Resolution" (P.129).

Refer to "Maximum Attachment Size" (P.156).

The port for [Send E-mail] is
not set to [Enabled].

Check the port setting for Send E-mail.

Refer to "Required Information" (P.50).

The e-mail address for the
machine has not been
registered.

Input the Administrator’s e-mail address.

Refer to "Administrator's E-mail Address" (P.44).

The registered SMTP server
setting is incorrect.

Check the SMTP server setting.

Refer to "SMTP Server (Connectivity > Protocols)" (P.50).

The authentication for the
SMTP server is not operated
correctly.

Check the authentication method for the
SMTP server.

Refer to "SMTP Server (Connectivity > Protocols)" (P.50).

The registered login name for
the SMTP server is incorrect.

For the SMTP server requiring authentication,
the e-mail address of the login user must be
registered. Check the registered login name.

Refer to "SMTP Server (Connectivity > Protocols)" (P.50).

The registered password for
the SMTP server is incorrect.

Check the registered password for the
authenticated user.

Refer to "SMTP Server (Connectivity > Protocols)" (P.50).

Содержание DocuCentreS2320

































































































































































































































































Результаты поиска

Содержание DocuCentreS2320

Отзывы:

Похожие инструкции для DocuCentreS2320

Бренды по названию

Популярные бренды

Fuji Xerox DocuCentreS2320, Руководство пользователя

Результаты поиска

Содержание DocuCentreS2320

Отзывы:

Похожие инструкции для DocuCentreS2320

Бренды по названию

Популярные бренды