Fuji Xerox DocuCentre-III 2007 Скачать руководство пользователя страница 357

Страница: 357 / 503

Error Code

355

rob
le

m Solving

016-760

[Cause] An error occurred during processing with Adobe

PostScript 3 Kit (optional).

[Remedy] Take one of the following actions:

Set [Image Quality] to [Standard].

Expand PostScript memory.

For information about [Print Mode], refer to the print driver's online help.
For information about memory, refer to "Allocate Memory" (P.129).

016-761

[Cause] An error occurred during image processing.
[Remedy] Set [Image Quality] to [Standard] and try again. If the

problem persists, set [Print Page Mode] to [On].

016-762

[Cause] The specified print language is not installed on the

machine.

[Remedy] In [Print Mode] under [Port Settings], specify another print

language.

016-763

[Cause] Unable to connect to the POP server.
[Remedy] Check if the address of the POP server is correctly set on

the machine.

016-764

[Cause] Unable to connect to the SMTP server.
[Remedy] Contact the SMTP server administrator.

016-765

[Cause] Unable to send the e-mail because the hard disk on the

SMTP server is full.

[Remedy] Contact the SMTP server administrator.

016-766

[Cause] An error occurred on the SMTP server.
[Remedy] Contact the SMTP server administrator.

016-767

[Cause] Unable to send the e-mail due to an incorrect address.
[Remedy] Check the address, and try again.

016-768

[Cause] Unable to connect to the SMTP server due to the

machine's incorrect mail address.

[Remedy] Check the machine's mail address.

016-769

[Cause] The SMTP server does not support confirmation of mail

distribution (DSN).

[Remedy] Send e-mail without setting confirmation of mail

distribution (DSN).

016-770

[Cause] Direct Fax is disabled.
[Remedy] Check the system administrator if Direct Fax is available. If

it is available, contact our Customer Support Center.

016-771

[Cause] Unable to retrieve the scan data repository address.
[Remedy] Check the connection to DNS. Or, check if the scan data

repository domain name has been registered to DNS.

016-772

[Cause] Unable to retrieve the scan data repository address.
[Remedy] Check the DNS address. Or, set the scan data repository

address with its IP address.

016-773

O [Cause] The machine's IP address is incorrect.

[Remedy] Check the DHCP environment. Or, assign a fixed IP

address to the machine.

Error Code

Category

Cause and Remedy

C P F S M O

* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is

printed on the label or card attached on the machine.

Содержание DocuCentre-III 2007























































































































































































































































































































































































































































































































Результаты поиска

Содержание DocuCentre-III 2007

Отзывы:

Бренды по названию

Популярные бренды

Fuji Xerox DocuCentre-III 2007, Руководство администратора

Результаты поиска

Содержание DocuCentre-III 2007

Отзывы:

Бренды по названию

Популярные бренды