iv
Others
CAUTION:
• If the cause of any fault cannot be determined despite reference
to the instruction manual, be sure to contact your dealer or Fuji
Electric’s technician in charge of adjustment. If the instrument is
disassembled carelessly, you may have a shock hazard or injury.
• Do not use a replacement part other than specified by the instru-
ment maker. Otherwise, adequate performance will not be
provided. Besides, an accident or fault may be caused.
• Replacement parts such as a maintenance part should be dis-
posed of as incombustibles.
Caution on maintenance and check
DANGER:
• When doors are open during maintenance or inspection for
adjusting the optical system, etc., be sure to purge sufficiently
the inside of the gas analyzer as well as the measuring gas line
with nitrogen or air, in order to prevent poisoning, fire or explo-
sion due to gas leaks.
CAUTION:
• Before working, take off a wrist watch, finger ring or the like
metallic accessories. And never touch the instrument with a wet
hand, Otherwise, you will have a shock hazard.
• If the fuse is blown, eliminate the cause, and then replace it with
the one of the same capacity and type as before. Otherwise,
shock hazard or fault may be caused.
