35
y
y
y
y
y
-2 Auto calibration start time setting
When FUNC key is pressed at the current time indica-
tion, the auto calibration start time and day will appear on
the main and sub indications. The AUTO CAL LED of
the function indicating lamps will flash. In the case of
start time, the decimal point on the main indication will
light steadily.
Press the
key and the auto calibration start time is
settable, so set a start time on the main indication.
The numeric value is incremented by pressing the
key.
Press the
key and the digit can be selected.
After setting the calibration start time, press the
key
and the calibration start day can be set on the sub indica-
tion. The bar indication will flash.
Press the
key and the bar will shift.
The auto calibration start time is settable up to one
week ahead.
When the auto calibration start time and day have been
set, press the ENT key.
The data is stored in memory.
When the auto calibration at the set time is finished,
the next auto calibration start time will be set
automatically.
To confirm the next auto calibration start time, then
carry out this operation and check the indication.
Note: When the auto calibration start time has been set, then set the auto calibration cycle.
NO
NO
NO
NO
FUNC
AUTO CA
＞
ENT
＞
SU TU
TH
MO WE FR
SA
SU TU
TH
MO WE FR
SA
SU TU
TH
MO WE FR
SA
SU TU
TH
MO WE FR
SA
)
(
∧
)
(
∧
＞
Flashes
NO
SU TU
TH
MO WE FR
SA
