Fuji Electric FRENIC-Multi Series, Инструкция по эксплуатации

Страница: 7 / 40

1-1
Chapter 1 BEFORE USING THE INVERTER
1.1 Acceptance Inspection
Unpack the package and check the following:
(1) The PG interface card is the model you ordered.
(2) The PG interface card is not damaged during transportation--no defective parts or lacking
parts.
(3) The model name "OPC-E1-PG" is printed on the PG interface card. (See Figure 1.2.)
(4) The PG interface card is applicable to your inverter.
Table 1.1 lists the inverter's ROM version to which the PG interface card is applicable.
Table 1.1 Applicable ROM Version
Series Type of inverter Applicable motor rating ROM version
FRENIC-Multi FRN ††† E1 † - ††† All capacities 0700 or later
Checking the ROM version
Use Menu #5 "Maintenance Information" on the keypad. (Refer to the FRENIC-Multi Instruction
Manual, Chapter 3, Section 3.4.6 "Reading maintenance information."
Display on LED Monitor Item Description
5_14
Inverter's ROM version
Shows the inverter's ROM version as a
4-digit code.
If you suspect the product is not working properly or if you have any questions about your product,
contact your Fuji Electric representative.
Figure 1.1 Figure 1.2
Hooks
CN3
Model
name