Fuji Electric FRENIC-Lift LM2A Series, Инструкция по эксплуатации, Страница: 15 / 73

xiii
Product warranty
To all our customers who purchase Fuji Electric products included in this documentation:
Please take the following items into consideration when placing your order.
When requesting an estimate and placing your orders for the products described in this document, please be
aware that any items such as specifications which are not specifically mentioned in the contract, catalog,
specifications or other materials will be as mentioned below.
In addition, the products described in this document are limited in the use they are put to and the place where
they can be used, etc., and may require periodic inspection. Please confirm these points with your sales
representative or directly with this company.
Furthermore we request that you inspect the purchased and delivered products at the time of delivery. Also,
prepare the area for installation of the inverter.
[ 1 ] Free of charge warranty period and warranty range
(1) Free of charge warranty period
1) The product warranty period is ''1 year from the date of purchase'' or 24 months from the
manufacturing date imprinted on the nameplate, whichever date is earlier.
2) However, in cases where the installation environment, conditions of use, frequency or use and times
used, etc., have an effect on product life, this warranty period may not apply.
3) Furthermore, the warranty period for parts repaired by Fuji Electric's Service Department is ''6
months from the date that repairs are completed.''
(2) Warranty range
1) In the event that breakdown occurs during the product's warranty period which is the responsibility of
Fuji Electric, Fuji Electric will replace or repair the part of the product that has broken down free of
charge at the place where the product was purchased or where it was delivered. However, if the
following cases are applicable, the terms of this warranty may not apply.
The breakdown was caused by the installation conditions, environment, handling or methods of
use, etc. which are not specified in the catalog, operation manual, specifications or other relevant
documents.
The breakdown was caused by a product other than the purchased or delivered Fuji's product.
The breakdown was caused by ta product other than Fuji's product, such as the customer's
equipment or software design, etc.
Concerning the Fuji's programmable products, the breakdown was caused by a program other
than a program supplied by this company, or the results from using such a program.
The breakdown was caused by modifications or repairs affected by a party other than Fuji
Electric.
The breakdown was caused by improper maintenance or replacement of replaceable items, etc.
specified in the operation manual or catalog, etc.
The breakdown was caused by a scientific or technical or other problem that was not foreseen
when making practical application of the product at the time it was purchased or delivered.
The product was not used in the manner the product was originally intended to be used.
The breakdown was caused by a reason which Fuji Electric is not responsible, such as lightning
or other disaster.
2) Furthermore, the warranty specified herein shall be limited to the purchased or delivered product
alone.
3) The upper limit for the warranty range shall be as specified in item (1) above and any damages
(damage to or loss of machinery or equipment, or lost profits from the same, etc.) consequent to or
resulting from breakdown of the purchased or delivered product shall be excluded from coverage by
this warranty.
(3) Trouble diagnosis
As a rule, the customer is requested to carry out a preliminary trouble diagnosis. However, at the
customer's request, this company or its service network can perform the trouble diagnosis on a
chargeable basis. In this case, the customer is asked to assume the burden for charges levied in
accordance with this company's fee schedule.