−
21
−
3. Press the
key twice.
The lower-limit display will indicate that the frequency can be set, as shown below.
Digital load display
Lower-limit display
←
"
" means that you can change the
frequency.
↓
"
" is the 50 Hz setting.
4. Press the
key.
Each time you press the
key, the digital load display will alternate between "
" and "
". If you
are using the system in an area with 60 Hz power, select "
".
5. Press the
key.
That completes the power frequency setting. Now, the system is ready to make measurements.
6. Reset the "PASS" to the original mode number.
Select "
"
(
allows changes in the upper and lower limit values, and you can select the limit pair
)
or
"
"
(
prohibit all changes
)
as described in steps 1 and 2 on the previous page. After the setting is
changed, press the
key.
Содержание CHECK MAN CM-5
Страница 31: ...27...
