−
15
−
Prohibiting changes
Prohibiting changes: This mode prevents the upper and lower values, and the
selected pair of limit values from being changed by pressing the keys.
1. Press the
and
keys. (Press the
key, first.) ....... During this operation, you cannot
measure loads.
Digital load display
Lower-limit display
In this mode, it is possible to change the
(
"
" refers to the mode
)
current setting. The decimal point next to
the 10
0
digit will flash.
2. Press the
key.
Each time you press the
key, the numbers shown in the load display will cycle in the following order:
"
→
→
→
→
"
When "
" is showing, release the key.
Digital load display
Lower-limit display
This mode prohibits any changes in the settings.
The decimal point next to the 10
0
digit will flash.
3. Press the
key. ...... Now, you can measure loads.
Digital load display
←
Upper-limit display
←
Lower-limit display
←
Pair number display
4. That completes this setting operation. No one will be able to change the upper and lower limit
values, or the selected limit pair by pressing a key.
REFERENCES
The changes prohibited mode still allows you to view the value of each of the upper and lower
limits, for each of the eight pairs, by following the procedure below.
(
You cannot change the
values.
)
①
Press and hold the
and
keys for approximately one second.
(
Press the
key, first.
)
②
Each time you press the
key, the pair number will change in the following order:
"
０→１→２→３→４→５→６→７→８→９→０
".
(
The pair number display shows the number of the currently selected pair.
)
Содержание CHECK MAN CM-5
Страница 31: ...27...
