15
2017 Fueltec Model CF50E Fuel Polishing System
1.
Stop the system.
2.
Close outlet valve at bottom of water separator
housing.
3.
Close inlet valves on primary bag filter housings.
4.
Loosen swing bolt eye nuts and remove housing
cover.
5.
Remove fastener wing nuts and remove and
replace coalescer cartridges.
6.
Replace fastener wing nuts hand tight.
7.
Inspect O
-
ring cover seal
8.
Install filter housing cover and swing bolts into
slots in cover.
9.
Tighten swing bolt eye nuts hand tight then 1/4
turn more.
(do not over tighten)
13. Open inlet & outlet valves
14. Resume operation.
WATER SEPARATOR/ COALESCER CARTRIDGE REPLACEMENT
The Model CF50E Mobile has five coalescer and two water separator cartridges within a
stainless steel housing.
Note:
Change coalescer cartridges when pressure gauge
on the fuel pump reads 20 PSI
