FTE Maximal MIND 32M, Руководство пользователя

Страница: 28 / 34

User´s manual · MIND 32M
Reserved for technical modifications and/or errors
-
11
-
MIND 32M Version en_1.0 Fte maximal
bandwidth will be the same after change the output channel. Because each input can amplifier BIII
and UHF channel avoid it is possible move channel with bandwidth 8 MHz to one channel with 7 MHz
of bandwidth. For example, the channel UHF has a bandwidth of 8 MHz and the BIII have a
bandwidth of 7 MHz. If move the channel from UHF to VHF band remember the output channel use
part of the bandwidth of the adjacent channels in VHF band. For that, is recommended move
channels in the same band.
When the output channel is blinking, use the ◄ ► to select the new output channel and press OK to
confirm.
5) Output level.
The output level of the channel can be adjusting from 96 dBµV to 116 dBµV. The maximum value (116
dBµV) can be limited by the value Level in the menu
Out .
When the output level parameter is blinking use the buttons ◄ ► to change the value level of the channel
of this filter. Press the button OK to confirm.
b) Editing a filter.
Select the filter to edit using the buttons ◄ ► and press the button OK. To select the parameter to modify
press OK until the parameter is blinking. Use the buttons ◄ ► to select the new value and confirm with
the button OK. Repeat these operations with the other parameter to update. The edit mode finish when all
parameter will be confirmed with OK.
c) Deleting a filter from an input
Select the filter to delete using the button ◄ ► . Press and hold 5
second the button OK. When the operation finish appears the
message “Channel deleted”. Press OK to continue.
Press ESC to return to the main menu.
3.8 Menu BIII-UHF2
Allow add, delete and edit the filter assigned to the input BIII-UHF2 . Follow
the steps in the point Menu BIII-UHF1 to do the adjustment.
3.9 Menu BIII-UHF3
Allow add, delete and edit the filter assigned to the input BIII-UHF3 . Follow
the steps in the point Menu BIII-UHF1 to do the adjustment.
3.10 Menu BIII-UHF4
Allow add, delete and edit the filter assigned to the input BIII-UHF4 . This
menu appears only when the BIII-UHF4 mode is BIII-UHF. Follow the steps in
the point Menu UHF1 to do the adjustment.
3.11 Menu OUT
In this menu will be doing the output settings. It has 2 options:
Level
Set the maximum output level. This parameter set the maximum output level
of the channels. The values are between 96 dBµV to 116 dBµV. The
maximum level is reduced automatic depending of the number of channel in
the output.
If the filters were added manually in the BIII-UHF menu, remember
adjustment the value of level.
Press OK to edit the value and use the buttons ◄ ► to select the new value. Press OK to confirm.
Press the button ► to select the screen Slope.
OUT ^
Level 116dBµV
< OUT >
Channel
deleted!